new product V20200C, vf20200c, vb 20200c & vi20200c vishay general semiconductor document number: 89072 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 dual high-voltage trench mos barrier schottky rectifier ultra low v f = 0.60 v at i f = 5 a features ? trench mos schottky technology ? low forward voltage drop, low power losses ? high efficiency operation ? low thermal resistance ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ab, ito-220ab and to-262aa package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency inverters, switching power supplies, freewheeling diodes, or-ing diode, dc-to-dc converters and reverse battery protection. mechanical data case: to-220ab, ito-220 ab, to-263ab and to-262aa epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for commercial grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 2 x 10 a v rrm 200 v i fsm 120 a v f at i f = 10 a 0.68 v t j max. 150 c to-220ab 1 2 3 1 k 2 3 to-263ab 1 2 k to-262aa pin 1 pin 2 k heatsink pin 1 pin 2 case pin 3 pin 1 pin 2 pin 3 pin 1 pin 2 pin 3 k V20200C vf20200c vi20200c vb20200c tmbs ? ito-220ab 1 2 3 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol V20200C vf20200c vb20200c vi20200c unit maximum repetitive peak reverse voltage v rrm 200 v maximum average forward rectified current (fig. 1) per device per diode i f(av) 20 10 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode i fsm 120 a peak repetitive reverse current at t p = 2 s, 1 khz per diode i rrm 0.5 a isolation voltage (ito-220ab only) from terminal to heatsink t = 1 min v ac 1500 v operating junction and storage temperature range t j , t stg - 40 to + 150 c www.datasheet.co.kr datasheet pdf - http://www..net/
new product V20200C, vf20200c, vb20200c & vi20200c vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89072 revision: 19-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit breakdown voltage i r = 1.0 ma t a = 25 c v br 200 (minimum) - v instantaneous forward voltage per diode (1) i f = 5 a i f = 10 a t a = 25 c v f 0.85 1.21 - 1.60 v i f = 5 a i f = 10 a t a = 125 c 0.60 0.68 - 0.76 reverse current per diode (2) v r = 180 v t a = 25 c t a = 125 c i r 6 3.6 - - a ma v r = 200 v t a = 25 c t a = 125 c - 5.6 150 18 a ma thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol V20200C vf20200c vb20200c vi20200c unit typical thermal resistance per diode r jc 2.8 5.0 2.8 2.8 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ab V20200C-e3/4w 1.88 4w 50/tube tube ito-220ab vf20200c-e3/4w 1.75 4w 50/tube tube to-263ab vb20200c-e3/4w 1.37 4w 50/tube tube to-263ab vb20200c-e3/8w 1.37 8w 800/reel tape and reel to-262aa vi20200c-e3/4w 1.45 4w 50/tube tube figure 1. maximum forward current derating curve case temperat u re (c) a v erage for w ard c u rrent (a) 25 20 15 10 5 0 0 25 50 75 100 125 150 175 v 20200c resisti v e or ind u cti v e load v f20200c figure 2. forward power loss characteristics per diode 0 1 2 3 4 5 6 7 8 9 0246 8 10 12 d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = t p /t t p t www.datasheet.co.kr datasheet pdf - http://www..net/
new product V20200C, vf20200c, vb 20200c & vi20200c vishay general semiconductor document number: 89072 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 figure 3. typical instantaneous forw ard characteristics per diode figure 4. typical reverse characteristics per diode figure 5. typical junction capacitance per diode 0.1 1 10 100 0 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 t a = 150 c t a = 125 c t a = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t a = 100 c 0.0001 0.01 0.1 1 10 100 10 20 30 40 50 60 70 8 0 90 100 percent of rated peak re v erse v oltage ( % ) t a = 150 c t a = 125 c t a = 25 c instantaneo u s re v erse c u rrent (ma) t a = 100 c 0.001 10 100 1000 10 000 0.1 1 10 100 re v erse v oltage ( v ) j u nction capaci tance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p figure 6. typical transient thermal impedance per diode figure 7. typical transient thermal impedance per diode 1 10 0.01 0.1 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w ) j u nction to case v 20200c 1 10 0.01 0.1 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w ) j u nction to case v f20200c www.datasheet.co.kr datasheet pdf - http://www..net/
new product V20200C, vf20200c, vb20200c & vi20200c vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89072 revision: 19-may-08 4 package outline dimensions in inches (millimeters) to-220ab 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15. 8 7) pi n 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.02 8 (0.70) 0.154 (3.91) 0.14 8 (3.74) 1 3 2 0.1 8 5 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.6 8 ) 0.135 (3.43) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) ito-220ab 0.076 (1.93) ref. 45 ref. pi n 3 2 1 0.404 (10.26) 0.3 8 4 (9.75) 0.076 (1.93) ref. 0.600 (15.24) 0.5 8 0 (14.73) 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.191 (4. 8 5) 0.171 (4.35) 0.671 (17.04) 0.651 (16.54) 0.035 (0. 8 9) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.025 (0.64) 0.015 (0.3 8 ) 0.105 (2.67) 0.095 (2.41) 0.02 8 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 0.135 (3.43) dia. 0.122 (3.0 8 ) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4. 8 3) 0.170 (4.32) 7 ref. 7 ref. 0.140 (3.56) dia. 0.125 (3.17) dia. 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) to-262aa heatsi n k pi n 2 pi n 1 pi n 3 0.401 (10.19) 0.3 8 1 (9.6 8 ) 0.1 8 5 (4.70) 0.175 (4.44) 0.055 (1.40) 0.045 (1.14) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.35) k 123 0.055 (1.40) 0.047 (1.19) 0.510 (12.95) 0.470 (11.94) pi n 0.411 (10.45) max. 0.250 (6.35) mi n . 30 (typ.) (ref.) 0.035 (0.90) 0.02 8 (0.70) 0.205 (5.20) 0.195 (4.95) 0.104 (2.65) 0.096 (2.45) 0.057 (1.45) 0.045 (1.14) 0.160 (4.06) 0.140 (3.56) 0.950 (24.13) 0.920 (23.37) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n . www.datasheet.co.kr datasheet pdf - http://www..net/
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners. www.datasheet.co.kr datasheet pdf - http://www..net/
|
